GOODWIN GAGE
GOODWIN GAGE & TOOL CO.

HOME | LINE CARD | FORCE GAGES & TEST STANDS | OPTICAL COMPARATORS | REFERENCES |

 

Chatillon DG Series
Mechanical Force Gauge

Click here for a .pdf spec sheet

 

The Chatillon DG Series mechanical force gauge is ideal for tensile or compression force measurement applications up to 500 lbf, 250 kgf or 2500 N. This unidirectional force gauge has one end dedicated to tensile tests and the other dedicated to compressive tests. The gauge features a large 2-1/4-inch dial which rotates 360-degrees for taring. A peak hold button is easy to use- it holds the pointer at the peak load. The DG Series has a force measurement accuracy of better than 0.5% full scale and included mechanical overload protection. The gauge is available in lbf, kgf and N units. The gauge comes with a Certificate of Calibration with NIST data, accessories and carrying case.

Standard Gauge Measurement Functions

  • Tensile Load (one direction dedicated to pull)
  • Compression Load (one direction dedicated to push)
  • Peak Tension or Compression Load (switch activated)

Models

Model
Capacity
Model
Capacity
Model
Capacity
DG-200
200 lb x 1.0 lb
DG-100KG
100 kg x 0.5 kg
DG-1000N
1000 N x 5 N
DG300
300 lb x 1.5 lb
DG-250KG
250 kg x 1.25 kg
DG-2500N
2500 N x 12.5 N
DG-400
400 lb x 2.0 lb
 
 
DG-500
500 lb x 2.5 lb
 
 

Common Accessories

Type Part No.
Capacity
Thread
Mates To
Chisel Point SPK-FMG-008B
500 lbf
5/16-18F
5/16-18M
Point SPK-FMG-009B
500 lbf
5/16-18F
5/16-18M
Notch SPK-FMG-010B
500 lbf
5/16-18F
5/16-18M
Flat SPK-FMG-011B
500 lbf
5/16-18F
5/16-18M
Hook SPK-FMG-012C
500 lbf
5/16-18F
5/16-18M
Extension Rod SPK-FMG-013B
500 lbf
5/16-18F
5/16-18M
Carrying Case NC002728
-
-
-

The accessories listed above are supplied standard with the DG force gauge. The DG force gauge has a 5/16-18M thread. Accessories are capacity dependent- only one accessory of a like type is supplied based on the force gauge capacity ordered.